Affluent Pump Withvertical Non Clogging Sewage Pump

• Method: Combined Treatment
• Usage: Industrial, Home, Agriculture, Hospital
• Flotation Machine Type: CAF Machine
• Centrifuge Installation: Vertical
• Main Features: Vertical Non Clogging
• Transport Package: Wood Box
• Model NO.: LW
• Specification: CE
• Trademark: maratti or OEM
• Origin: Shanghai, China
• HS Code: 84101330
• Production Capacity: 50000/30days

Product Description

Products Name:affluent pump withVertical Non Clogging Sewage Pump

Product overview:

LW type vertical non clogging sewage pump is based on the introduction of foreign advanced technology, combined with the use of domestic water pump features a new generation of pump products designed and produced successfully, with significant energy saving effect, anti winding, no blocking, automatic installation and automatic control characteristics. In the carriage of solid particles and long fiber waste, has a unique effect.

Unique impeller structure and a new mechanical seal with the series of pumps, can effectively transfer and long fibers containing solids. Compared with the conventional impeller impeller, the pump impeller uses a single or dual channel form, it is similar to a cross-section of the same size pipe, with a flow of very good too, with reasonable volute chamber, the pump has the advantages of high efficiency, the impeller by the static and dynamic balance test, the pump running without vibration.

Two, product features:

1. Using a unique single or double blade impeller structure, greatly improving the through capacity of sewage, can effectively through the fibre material 5 times of pump diameter and solid particles 50% of pump diameter.
2. Mechanical seals decay using a new type of cemented tungsten titanium material, can pump the security more than 8000 hours of continuous operation.
3. The compact structure, small volume, low noise, energy saving, convenient maintenance, no need of pump room, dive into the water to work, greatly reducing the project cost.

Three, the main use of:

Suitable for chemical, petroleum, pharmaceutical, mining, paper industry, cement plant, steel plant, power plant, coal processing industry, as well as plant drainage system, municipal engineering, construction sites in the city sewage treatment industry conveyor belt particles in the water, dirt, and can also be used for pumping clean water and corrosive medium.

fault phenomenon	failure cause	elimination methods
	1.No power supply or one or two phase power supply is needed	Check all phases of power supply and restore power supply
	2.Poor contact of ac contactor and burning of coil	Repair or replace contactors
can not start	3. The power switch is not closed, malfunction or damaged	Close the switch and replace it if the power indicator does not turn on
	4. Thermal relay trip or damage	Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
	Water level is too low	Put water in the sink
	The motor burned	Repair or replace the motor
	1.Line is loose	Check wiring and tighten connectors
	2.Frequency converter malfunction	Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal	3The frequency converter is damaged	Repair or replace
Automatic transmission failure	4.Pressure switch damage	Repair or replace
	5The pressure transmitter is damaged	Repair or replace
	6.Switch failure	Repair or replace
Pump non - suction pressure gauge pointer to beat violently	Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument	Check pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power	Too much flow, impeller wear	Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow