Fire Pumping Station with Centrifugal Fire Pumps

• After-sales Service: 1 Year
• Warranty: 1 Year
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Electric
• Material: Cast Iron
• Model NO.: HHL
• Structure: Multistage Pump
• Assembly: Liquid Pumps
• Power: Electric
• Start Up: Electric Pump
• Type: Blade Pump
• Application: Slurry Pump
• Industry: Fire Pump
• Media: Water
• Performance: Explosion-Proof Pumps
• Theory: Centrifugal Pump
• Main Advantage: Xq-Type Fixed Centrifugal Fire Pumps
• Place of Origin: Shanghai, China
• Brand Name: Lyson
• Standard or Nonstandard: Standard
• Transport Package: Standard Export Packing or According to Customers′
• Specification: CE
• Trademark: LYSON or OEM
• Origin: Shanghai, China
• HS Code: 84101330
• Production Capacity: 20000

Product Description

Product Description

Products Name:fire pumping station with Fixed Centrifugal Fire Pumps

Conditions of Use:
1, Equipment should be installed indoors, for the basic level of coagulation platform or equipment can guarantee the normal work of the formation of the ground.
2, Since irrigation water inflow should be able to pump inlet cavity and the pressure of equipment is not more than 0.5Mpa, the water quality should comply with the Fire Code requirements.
3, Ambient temperature 0 ~ 50 Celsius does not freeze, humidity <90% non-condensing, non-corrosive gases, non-inflammable and explosive gas.
4, Permit altitude 1000m.

Product Features:

1, XBD Series fire pressure water supply equipment, in the control system uses programmable control technology, fire main pump soft start timing technology, effectively ensure the safe operation of fire fighting equipment.
2, Effective control of the tank the ratio of gas and water to ensure that by Fire Code (30 seconds) or (10 seconds) design an effective water volume.
3, May have dual power supply design, and automatically switch.
4, Programming multi-function control, fire main pump timing soft-start inspection. Fire Control Center with computer networking.
5, Acceptable to a wide range of fire signals, can be networked with the Fire Services Center.
 

fault phenomenon	failure cause	elimination methods
	1.No power supply or one or two phase power supply is needed	Check all phases of power supply and restore power supply
	2.Poor contact of ac contactor and burning of coil	Repair or replace contactors
can not start	3. The power switch is not closed, malfunction or damaged	Close the switch and replace it if the power indicator does not turn on
	4. Thermal relay trip or damage	Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
	Water level is too low	Put water in the sink
	The motor burned	Repair or replace the motor
	1.Line is loose	Check wiring and tighten connectors
	2.Frequency converter malfunction	Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal	3The frequency converter is damaged	Repair or replace
Automatic transmission failure	4.Pressure switch damage	Repair or replace
	5The pressure transmitter is damaged	Repair or replace
	6.Switch failure	Repair or replace
Pump non - suction pressure gauge pointer to beat violently	Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument	Check pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power	Too much flow, impeller wear	Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow

♦ ESTABLISHED IN THE SIXTIES


♦ ONE OF THE FIRST THROUGH THE ISO9001:2008 DOMESTIC,

INTERNATIONAL QUALITY SYSTEM CERTIFICATION


♦ SILVER MEDAL WAS AWARDED AT THE NATIONAL CONFERENCE ON THE

APPLICATION OF SPARK CUP TECHNOLOGY


♦ WIN THE NATIONAL AWARD FOR EXCELLENCE IN CIVILIZATION COMPETITION 


♦ GET THE LC OF THE CHINESE GOVERNMENT