Direct-Coupled Horizontal Single-Stage Single-Suction Centrifugal Pumps

• Customization: Available
• Max.Head: 125
• Max.Capacity: 400
• Model NO.: LISW
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Color: Blue
• Transport Package: Mechanical Seal Packaging
• Specification: caliber: 20~300mm
• Trademark: Lyson
• Origin: China
• Production Capacity: 5000pieces/Month

Product Description

LISW single-stage single-suction horizontal centrifugal pumps are new generation energy-saving products newly developed by us.They are new upgraded products designed and produced based on the performance parameters of the LIS centrifugal pumps and an advanced hydraulic model and strictly in line with relevant requiremnets of the national standard ISO2858 and the national standard JB/T53058-93.They are applicable to the conveying of noncorrosive frozen water and hot water in fields such as air-conditioing,heating,sanitary water,water treatment,cooling and refrigeration systems,liquid circulation and water supply,pressurization,and irrigation.
(Please refer to the relevant annex for the design maximum operating pressures of some of the pumps)



                                          Structure
LISW pumps:they are single-stage single-suction horizontal centrifugal pumps.The inlets adopt the axial suction manner and their outlets face upward.
Model/specification-caliber:20~300(mm)
The pumps with a caliber of 20mm to 300mm are direct-coupled with motors;the pump bearings are completely concentric and realize direct power transmission;they have the advantages of low noise,small vibration,and steady operation.  
Maximum operating pressure:(see the attached Table).The medium is clean water with a temperature not higher than 80ºC,or liquids with physical and chemical properties similar to that of clean water.
Body,cover,and impeller:cast iron(HT200)
Pump bearing:45#,2Cr13
Mechanical seal:rubber bellows are used for sealing;the rotating ring and the stationary ring are made of a hard alloy.
(or other applicable materials may be used according to requirements of the mediums conveyed by users)
                             Product parameters

T≤80ºC	Design maximum operating pressure:1.6Mpa
Q=2.5~400m3/h	H=5~125m
n=1480/2900  r/min	P=0.55~132KW