Vertical Multistage Centrifugal Pump with Convey Physical Chemical Properties

• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Clear Water
• Model NO.: LDLA
• Position of Pump Shaft: Vertical Pump
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• Type: Ldla
• Color: Black
• Material: Cast Iron
• Motor: 100% Cooper Wire
• Pressure: High Pressure
• Theory: Centrifugal
• Transport Package: Wooden Box
• Specification: ISO9001/CE
• Trademark: LYSON or OEM
• Origin: Shanghai, China
• HS Code: 8413709990
• Production Capacity: 5000/Month

Product Description

Products Name: LDLA Vertical Multistage Centrifugal Pump to Convey Physical and Chemical Properties Similar to Clear Water

Conditions of use: Suitable for conveying the temperature under 80 celsius water and similar to that of liquid water, pump system working pressure of up to 23 bar.

The scope of performance parameter: This series a total of 26 species, 348 kinds of specifications and its

performance parameters range:

1 flow Q= 4.9~216m3/h

2. Lift H= 18 ~ 230 m

3. Speed n=1480/2980  r/min

4. Power P= 1.5~ 315kW

fault phenomenon	failure cause	elimination methods
	1.No power supply or one or two phase power supply is needed	Check all phases of power supply and restore power supply
	2.Poor contact of ac contactor and burning of coil	Repair or replace contactors
can not start	3. The power switch is not closed, malfunction or damaged	Close the switch and replace it if the power indicator does not turn on
	4. Thermal relay trip or damage	Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
	Water level is too low	Put water in the sink
	The motor burned	Repair or replace the motor
	1.Line is loose	Check wiring and tighten connectors
	2.Frequency converter malfunction	Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal	3The frequency converter is damaged	Repair or replace
Automatic transmission failure	4.Pressure switch damage	Repair or replace
	5The pressure transmitter is damaged	Repair or replace
	6.Switch failure	Repair or replace
Pump non - suction pressure gauge pointer to beat violently	Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument	Check pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power	Too much flow, impeller wear	Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow