Diesel Fire Heat Pump Water Heater Fire Systems Fire Pump

• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Multistage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Double-Suction Pump
• Model NO.: XBC
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Circulating Pump
• Material: Stainless Steel 304
• Product Name: Fire Pump List
• Certificate: ISO9001
• Color: Red
• Type: Vertical
• Name: Lyson Fire Pump
• Motor: 100% Copper Wire
• Warranty: 1 Year
• Feature: High Efficiency
• Voltage: 220V/380V
• Transport Package: Woodemn Box
• Specification: 80Kg
• Trademark: LYSON
• Origin: Shanghai
• HS Code: 8413709110
• Production Capacity: 100

Product Description

Product details

Specifications.

 

Normal temperature type:-15C~+70C

 
Hot water type:+70C~+120C

Ambient temperature :up to +40C

1. Application Conditions:

XBC Diesel Fire Fighting Pump Group is aplicable for conveying water at room temperature or the liquid resembing water, or for water of fire fighting or others.
 

2. Performance Parameters:

Rated Flow Q=10~250 L/S

Rated pressure Mpa=0.3~1.05Mpa

Rev n=1500, 2000, 2200, 2400 r/min

HP P=17.7~243 HP

Inlet diameter DNa=125~450 mm

Outlet diameer DNa=80~350 mm

Allowable working pressure≤ 25 bar
 

3. Advantages:

Starting automatically when there is no power supply

Effective

Stable and reliable running

Easy maintaining

Long service life
 

4. Applications:

water supply to fire spraying system

fault phenomenon	failure cause	elimination methods
	1.No power supply or one or two phase power supply is needed	Check all phases of power supply and restore power supply
	2.Poor contact of ac contactor and burning of coil	Repair or replace contactors
can not start	3. The power switch is not closed, malfunction or damaged	Close the switch and replace it if the power indicator does not turn on
	4. Thermal relay trip or damage	Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
	Water level is too low	Put water in the sink
	The motor burned	Repair or replace the motor
	1.Line is loose	Check wiring and tighten connectors
	2.Frequency converter malfunction	Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal	3The frequency converter is damaged	Repair or replace
Automatic transmission failure	4.Pressure switch damage	Repair or replace
	5The pressure transmitter is damaged	Repair or replace
	6.Switch failure	Repair or replace
Pump non - suction pressure gauge pointer to beat violently	Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument	Check pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power	Too much flow, impeller wear	Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow

Related products


Company Information

 

♦ ESTABLISHED IN THE SIXTIES


♦ ONE OF THE FIRST THROUGH THE ISO9001:2008 DOMESTIC,

INTERNATIONAL QUALITY SYSTEM CERTIFICATION


♦ SILVER MEDAL WAS AWARDED AT THE NATIONAL CONFERENCE ON THE

APPLICATION OF SPARK CUP TECHNOLOGY


♦ WIN THE NATIONAL AWARD FOR EXCELLENCE IN CIVILIZATION COMPETITION 


♦ GET THE LC OF THE CHINESE GOVERNMENT
 

Certification



Transportation



FAQ