Xbc Model Diesel Engine Horizontal Fire Water Pump

• Customization: Available
• Main Advantage: Save Diesel
• Stroke: Four Stroke
• Model NO.: XBC
• Cooling Method: Water Cooling
• Transport Package: Standard Export Packing or According to Customers′
• Specification: CCCF
• Trademark: LYSON or OEM
• Origin: Shanghai, China
• HS Code: 84101330
• Production Capacity: 2000

Product Description

XBC model diesel engine water pump,diesel water pump

Diesel Engine Driven Fire Pump

We are specializing in the production of pump more than 50 years

1.Q: 6.3-400M3/H

2.H:5-125M

3. Speed: 1450 r/m

Specifications

With stable performance and high efficiency, it mainly used for water works, irrigation, drainage station, power station, air-conditioner circling water supply, industry, fire-protection water supply, ship industry, oil industry and other situations which need to transport water like liquid.

With volute structure, it has big flow capacity and high head.

XBC series horizontal single-stage firefighting pump 

1. the max working pressure is 1.6Mpa, it means suction pressure with head no more than 1.6Mpa.
2. transport medium similar with water.
3. environmental temperature no more than 40 degrees, the height above sea level no more than 1000meters. And the humidity no more than 95%.
4. it is single-stage pump, mainly used for booster water supply and fire fighting equipments or similar situations.

 

fault phenomenon	failure cause	elimination methods
	1.No power supply or one or two phase power supply is needed	Check all phases of power supply and restore power supply
	2.Poor contact of ac contactor and burning of coil	Repair or replace contactors
can not start	3. The power switch is not closed, malfunction or damaged	Close the switch and replace it if the power indicator does not turn on
	4. Thermal relay trip or damage	Check whether the motor is blocked, find out the reason and eliminate it.Manual reset is replaced if it cannot be started
	Water level is too low	Put water in the sink
	The motor burned	Repair or replace the motor
	1.Line is loose	Check wiring and tighten connectors
	2.Frequency converter malfunction	Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
The manual is normal	3The frequency converter is damaged	Repair or replace
Automatic transmission failure	4.Pressure switch damage	Repair or replace
	5The pressure transmitter is damaged	Repair or replace
	6.Switch failure	Repair or replace
Pump non - suction pressure gauge pointer to beat violently	Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument	Check pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power	Too much flow, impeller wear	Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow

 ESTABLISHED IN THE SIXTIES


♦ ONE OF THE FIRST THROUGH THE ISO9001:2008 DOMESTIC,

INTERNATIONAL QUALITY SYSTEM CERTIFICATION


♦ SILVER MEDAL WAS AWARDED AT THE NATIONAL CONFERENCE ON THE

APPLICATION OF SPARK CUP TECHNOLOGY


♦ WIN THE NATIONAL AWARD FOR EXCELLENCE IN CIVILIZATION COMPETITION 


♦ GET THE LC OF THE CHINESE GOVERNMENT