Iswk (R) High Flow and High Pressure Centrifugal Pump

• Max.Head: 110m-150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: High Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: ISWK(R)
• Position of Pump Shaft: Horizontal Pump
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump, Clear Water
• Type: Liswk(R)
• Motor: 100% Copper Wire
• Color: Blue
• Structure: Single-Stage
• Fuel: Electric
• Theory: Centrifugal
• Transport Package: Wooden Box
• Specification: ISO9001/CE
• Trademark: LYSON or OEM
• Origin: Shanghai, China
• HS Code: 8413709990
• Production Capacity: 50000/Month

Product Description

Products Name: Iswk (R) High Flow and High Pressure Centrifugal Pump

Conditions of use:

Note LISG is applicable to transport temperature does not exceed 120 CELSIUS water and similar to water.



The scope of performance parameter:

1. The flow of Q=2.5 ~ 1200m3/h

2. Lift H=5 ~ 125m

3. Speed n=980/1480/2950r/min

4. Power P=0.55 ~ 250kW

5. Diameter of inlet Dna=40 ~ 80mm

6. Outlet diameter DNm=32 ~ 65mm

fault phenomenon	failure cause	elimination methods
The manual is normal Automatic transmission failure	1.No power supply or one or two phase power supply is needed	Check all phases of power supply and restore power supply
	Water level is too low	Put water in the sink
	The motor burned	Repair or replace the motor
	1.Line is loose	Check wiring and tighten connectors
	2.Frequency converter malfunction	Check the fault content, check the cause according to the frequency converter manual, and restart after reset.Or disconnect the inverter power supply for a few seconds, the inverter fault reset before starting.
	3The frequency converter is damaged	Repair or replace
	4.Pressure switch damage	Repair or replace
	5The pressure transmitter is damaged	Repair or replace
	6.Switch failure	Repair or replace
Pump non - suction pressure gauge pointer to beat violently	Insufficient water supply for perfusion, air leakage at the connection between pipeline and instrument	Check pipeline and bottom valve, refill water diversion. Tighten air leakage
The pump consumes too much power	Too much flow, impeller wear	Check whether the pump shaft is bent, replace the impeller, close the outlet valve to reduce the flow